1.什么是線棒老化架？

  線棒老化架是專用于老貨測試時模擬產品在現實使用條件中涉及到的各種因素對產品產生老化的情況進行相應條件加強實驗的過程，該實驗主要針對塑膠材料，常見的老化主要有光照老化，濕熱老化，熱風老化。產品使用在戶外常期受太陽光照，想要了解該產品在戶外能夠使用的壽命就要模擬太陽紫外光進行UV老化實驗，當然實驗的強度要比實際戶外光照的強度要大很多，從而縮短測試時間，可以通過短時間的測試了解產品使用多少年后的老化情況。

同理如果產品使用在浴室等潮濕溫度偏高的環境就要進行濕熱老化，如果產品使用在機器的散熱位置就要進行熱風老化，當然根據產品出口到不同國家地區會有響應的測試標準：

2.線棒老化架的種類

  燈管老化架、 電源老化架、led老化架、老化測試架、節能燈老化架、e17燈頭老化架、開關電源老化架 深圳電源老化架、led電源老化架、led路燈老化架

3為什么要進行老化測試？有什么意義？

  電子產品,不管是元件,部件,整機,設備,都要進行老化和測試.

老化和測試不是一個概念.先老化后測試.電子產品(所有產品都是這樣)通過生產制造后,形成了完整的產品。已經可以發揮使用價值了,但使用以后發現會有這 樣那樣的毛病,又發現這些毛病絕大部分發生開始的幾小時至幾十小時之內,后來干脆就規定了電子產品的老化和測試,仿照或者等效產品的使用狀態,這個過程由 產品制造者來完成.通過再測試。把有問題的產品留在工廠,沒問題的產品給用戶,以保證買給用戶的產品是可靠的或者是問題較少的.這就是老化測試的意義。

恒川貨架廠線棒老化架主要特點：

◆主體采用鈑金結構、烤瓷漆、帶腳輪、方便移動；

◆雙邊工作式，分層結構設計、負載為抽屜式安裝，方便維護與更換；

◆老化產品數量可根據產品負載大小來定制，現有規格為45組（200W）、60組（150W）、98組（100W）、128組（75W）、200組（30W）；

◆老化車自帶工作電壓表、電流表和監控功能，含工作指示燈，測量指示燈和測量開關，按下測量開關，即可顯示當前組老化電壓、電流值；

◆線棒老化車自帶保護裝置，超負載工作時可自動切斷電源。

技術參數：

◆測量電壓：AC/DC0-30V/50V/100V

◆電壓分辨率：10mV

◆測量電流：AC/DC0-10A/20A/30A

◆電流分辨率：10mV

◆電流穩定性及誤差：<20mA

◆測量功率：100W/200W/300W

◆測量精度：0.2%

1. What is wire rod aging rack?

Wire rod aging rack is specially used in the testing of old goods to simulate various factors involved in the actual use conditions of products to conduct the corresponding condition strengthening experiment on the aging of products. This experiment is mainly aimed at plastic materials. Common aging mainly includes light aging, damp and heat aging, and hot air aging. Products used in outdoor period by the sun, want to know the product to be able to use in the outdoor life is simulated solar ultraviolet UV aging experiment, the strength of the experiment, of course, outdoor light intensity is much larger than it actually is, so as to shorten the testing time, can pass the test for a short period of time to understand aging products use many years later.

In the same way, if the product is used in an environment with high humidity temperature, such as the bathroom, it will undergo damp and heat aging; if the product is used in the heat dissipation position of the machine, it will undergo hot wind aging. Of course, according to the test standards of products exported to different countries and regions, there will be responses:

2. Type of wire rod aging rack

Lamp aging rack, power aging rack, led aging rack, aging test rack, energy-saving lamp aging rack, e17 lamp holder aging rack, switching power aging rack shenzhen power aging rack, led power aging rack, led street lamp aging rack

3. Why do we need the aging test? What's the point?

Electronic products, whether components, components, complete machines, equipment, are aging and testing.

Aging and testing are not the same thing. Aging first, testing later. Electronics (as with all products) are manufactured to form a complete product. Already can play a use value, but use after discovery will have this kind of problem, and found that for the most part these faults occur in the first few hours to a few hours, then simply defines aging and testing of electronic products, to simulate or equivalent products using state, this process is done by the manufacturer. Through the test again. Leave the defective products at the factory and give the defective products to the users to ensure that the products bought to the users are reliable or less problematic. This is the significance of aging test.

Main features of aging rack of wire rod in hengchuan shelf factory:

◆ the main body adopts sheet metal structure, ceramic paint, casters, easy to move;

◆ double-sided operation, layered structure design, load for drawer type installation, easy maintenance and replacement;

◆ the quantity of aging products can be customized according to the load size of products. The existing specifications are 45 groups (200W), 60 groups (150W), 98 groups (100W), 128 groups (75W), and 200 groups (30W).

◆ the aging car comes with its own working voltmeter, ammeter and monitoring function, including working indicator light, measuring indicator light and measuring switch. Press the measuring switch to display the aging voltage and current value of the current group;

◆ wire rod aging car with protective device, can automatically cut off the power supply when working over load.

Technical parameters:

◆ measurement voltage: AC/ dc0-30v /50V/100V

◆ voltage resolution: 10mV

◆ measuring current: AC/ dc0-10a /20A/30A

◆ current resolution: 10mV

Current stability and error: <20mA

◆ measuring power: 100W/200W/300W

◆ measurement accuracy: 0.2%